Stair Designer · Woodstock, GA · North Metro Atlanta
Design your stairs. We’ll build and refinish them.
Set the size, pick treads, a rail and balusters, and watch your stairs take shape in 3D. You can start from a photo of your stairs if you like. You end with a parts list you can send to us.
25 Years of Experience · Insured & Family Owned · Free in-home measure
The Hardwood Guys Stair Designer
Stair remodeling and refinishing in North Metro Atlanta
The Hardwood Guys remodel and refinish staircases in Woodstock, Canton, Marietta, Roswell, Alpharetta and the rest of North Metro Atlanta. We do everything from A to Z. We install new treads, risers, rails, newels and balusters, and we sand and refinish the stairs you already have. One crew handles your stairs start to finish, so you are not lining up a carpenter, a painter and a floor finisher.
How the designer works
Start by telling us what you have: new stairs, existing stairs you want covered with new wood, or existing stairs you want refinished. Pick the shape of your staircase, count the steps you walk on, and enter three measurements: the width, the riser height and the tread depth. Fractions like 10-1/4 work fine. Then choose your treads, handrail, newels and balusters.
Every choice redraws your stairs. Switch between a plan view, a side view and a 3D model you can turn with your finger or your mouse. The numbers under the viewer, total rise, treads, angle and rail length, update as you go.
You can also start from a photo of your stairs, uploaded or taken on your phone. AI gives a first guess at the stair type, the number of steps and the open side for you to check, and the picture it makes of your staircase with the new rail, newels and balusters is a preview, not a measurement or a promise. Your design gets a share link you can send us.
What you get at the end
You get a list: how many treads and risers, how many pieces of rail, how many newels and balusters, and the hardware that goes with them. Each line says why it is there. If you chose to refinish, you get a clear plan of the work instead, with parts listed only for anything you want replaced. Copy the list, email it to yourself, or send it to us with the form below.
What it does not do
The designer counts parts. It does not set a price. Your installed price comes from a free in-home measure, where we look at your stairs in person and check every number on the list. Balusters on the list are spaced so a 4-inch sphere cannot pass, and you should always check your local building code.
Ready for more detail?
Read about stair tread and baluster replacement or stair refinishing. See the red oak stair parts and white oak stair parts we stock, in red oak, white oak and iron.
Stair Designer Questions
Does the Stair Designer give me a price?
No. It gives you a parts list with quantities. Your installed price comes from a free in-home measure, where we check every number on the list in person.
Can I use it if I only want my stairs refinished?
Yes. Choose Refinish my existing stairs. You get a plan of the work: treads sanded and refinished, risers stained or painted, rails and newels refinished. A parts list shows up only for anything you choose to replace.
How accurate is the parts list?
Quantities are rounded up from the measurements you enter, so treat the list as a careful estimate. We confirm every measurement and part at the free in-home measure before anything is ordered.
Do you install the parts too?
Yes. We install and refinish, so one crew handles your stairs start to finish. You can build a new staircase, cover the one you have, or refresh it.
Can I start from a photo of my stairs?
Yes. Upload a photo or take one with your phone, and AI reads the stair type, the number of steps and which side is open as a first guess. You check each answer and fix anything it got wrong. Then tap where the railing starts and ends to see a quick drawn mock-up of the parts you picked, or choose Show my new stairs for a picture of your staircase with the new rail, newels and balusters. The picture is a preview, not a measurement or a promise, and we check every number at the free in-home measure.
Do you keep my photos?
No. Photos are used to read your stairs and make the preview picture, and they are not saved. Only your design choices are saved, when you get a share link.
Request a Free Estimate
Tell us about your floors and we'll call or text to set up your free on-site estimate — usually the same business day.
Thanks — We'll Be In Touch
A member of The Hardwood Guys team will call or text you to schedule your free on-site estimate. We schedule 24/7.